This article is about the notes for the installation of ball valves. The ball valve was born in the 1950s, with the rapid development of science and technology, production technology and product...
We are going to talk about the difference between globe valves and gate valves. In terms of structure: The length of gate valves is shorter than that of globe valves, and the height is higher than that...
This article is about the structure and principle of O type ball valves and V type ball valves. There are many kinds of structures of the ball valve, but they are almost the same. It is also the opening...
Here are the differences between bellows globe valves and ordinary globe valves. Bellows globe valves are also known as bellows seal globe valves. They are designed to ensure stem zero leakage by forming...
Below are the differences between globe valves and ball valves. 1. The fluid resistance is not the same. The fluid resistance of ball valves is small. The resistance coefficient is equal to the...
The cast steel valve is the valve by cast. The general pressure grade of cast steel valves is relatively low (such as PN16, PN25, PN40, but there are also high pressures. They can be 1500Lb, 2500Lb)....
With the continuous development of oil fields, domestic oil fields have entered the middle and late development stage, and oil well maintenance and oil and gas transportation have become the key work...
Do you know the difference between rising stem gate valves and non-rising stem gate valves? Let's see it in this article. What are the structural features of gate valves? The gate valve...
How to repair electric ball valves? What problems do we need to pay attention to? Now it is common that the electric ball valve is used. It is because this kind of ball valves often need to work under...
The ball valve is one valve with a ball body as the opening and closing part. With the rapid development of our domestic processing technology, testing technology and intelligent control technology, as...
Valves reduce energy in fluid flow, but their uses are essential in operations requiring limited flow. Therefore, it is very important to have a full understanding of the construction and operation of...
It is the most basic unit for valve assembly of the whole machine, and several parts make up the components of the valve (such as bonnet and disc components, etc.). The assembly process of several parts...