Through Conduit Gate valve, 2-48 Inch, API 6D, API 6A, OS & Y
Key Specifications / Features
Model No.: Hits: 27
Through Conduit Gate valve Manufacturer: Full Port Slab Through Conduit Gate Valves, Resilient or Metal Seat, API 6D, API 6A, OS&Y, 2-48 Inch, Class 150-2500 LB.
Request a quoteTags:
Detail Infomation
Slab Gate Valve
Med Slab Through Conduit Gate Valves are manufactured with a full bore port, rising stem OS & Y and with floating seats and gate, pressure energized, for a bubble-tight shut off upstream and downstream under both low and high differential pressure. Double block and bleed capability and automatic relief of excess body pressure are standard features of this seat design. The smooth, continuous bore minimizes turbulence within the valve and when in the open position it produces a pressure drop equivalent to a portion of pipe of the same length and diameter. The seat faces are outside the flow stream and therefore protected from the erosive action of the flow. Pigs and scrapers can be run through the valve without damage.
Med offers Through Conduit Gate valves in One piece uni-body with the following features:
Size Ranges: 2-48 Inch.
Pressure Ratings: ANSI Class 150-2500 LB.
Standards compliance: API 6D, API 6A or equivalents.
Materials: Cast Carbon Steel, Cast Stainless Steel, Cast Duplex or Other Specials.
Ends Connections: Flanged (FF, RF, RTJ) to international standards.
OS & Y, Outside Stem and Yoke.
Resilient or Metal Seat Options.
Optional Locking Device or Stem Extension.
Optional Top works to ISO 5211.
Full Port.
Med offers Slab Gate Valves including, but not limited to
▲ Resilient Seat Through Conduit Gate Valve
▲ Metal Seat Through Conduit Gate Valve
Med Slab Through Conduit Gate Valves are manufactured with a full bore port, rising stem OS & Y and with floating seats and gate, pressure energized, for a bubble-tight shut off upstream and downstream under both low and high differential pressure. Double block and bleed capability and automatic relief of excess body pressure are standard features of this seat design. The smooth, continuous bore minimizes turbulence within the valve and when in the open position it produces a pressure drop equivalent to a portion of pipe of the same length and diameter. The seat faces are outside the flow stream and therefore protected from the erosive action of the flow. Pigs and scrapers can be run through the valve without damage.
Med offers Through Conduit Gate valves in One piece uni-body with the following features:
Size Ranges: 2-48 Inch.
Pressure Ratings: ANSI Class 150-2500 LB.
Standards compliance: API 6D, API 6A or equivalents.
Materials: Cast Carbon Steel, Cast Stainless Steel, Cast Duplex or Other Specials.
Ends Connections: Flanged (FF, RF, RTJ) to international standards.
OS & Y, Outside Stem and Yoke.
Resilient or Metal Seat Options.
Optional Locking Device or Stem Extension.
Optional Top works to ISO 5211.
Full Port.
Med offers Slab Gate Valves including, but not limited to
▲ Resilient Seat Through Conduit Gate Valve
▲ Metal Seat Through Conduit Gate Valve
Comment Form
