Flange Concentric Butterfly Valve, API 609, 2-48 Inch, CL150
Key Specifications / Features
Model No.: Hits: 10
Flange Concentric Butterfly Valve Provider: Concentric Butterfly Valves, Flanged Ends, 2-48 Inch, 150 LB, API 609, ASME B16.10, ASME B16.5, DIN 3202.
Request a quoteTags:
Detail Infomation
Flange Concentric Butterfly Valve
The Flange Concentric Butterfly Valves are designed to maintain a seal against bi-directional pressure differential to prevent backflow in systems designed for unidirectional flow. It accomplishes this with a tightly fitting seal, i.e., gasket, o-ring, precision machined, and a flat valve face on the upstream and downstream sides of the valve, valves have threaded inserts at both sides of the valve body. This allows them to be installed into a system using two sets of bolts and no nuts. The valve is installed between two flanges using a separate set of bolts for each flange. This setup permits either side of the piping system to be disconnected without disturbing the other side.
Med Flange Concentric Butterfly Valves are with main Features as below:
ISO 5752, BS 5155, API 609, MSS-SP-68, ASME B16.10, ASME B16.5, DIN 3202.
Materials: Cast Iron and Ductile Iron.
Pressure Ratings: ANSI Class 150 LB, PN10, PN16.
Size Ranges: 2-48 Inch, 50mm-1200mm (Larger sizes upon request).
Ends Connections: F.F, R.F.
Optional Seatings: Resilient NBR, EPDM, VITON.
Actuations: Manual, Pneumatic, Electric, Hydraulic (Counterweight) & Electro-hydraulic.
The Flange Concentric Butterfly Valves are designed to maintain a seal against bi-directional pressure differential to prevent backflow in systems designed for unidirectional flow. It accomplishes this with a tightly fitting seal, i.e., gasket, o-ring, precision machined, and a flat valve face on the upstream and downstream sides of the valve, valves have threaded inserts at both sides of the valve body. This allows them to be installed into a system using two sets of bolts and no nuts. The valve is installed between two flanges using a separate set of bolts for each flange. This setup permits either side of the piping system to be disconnected without disturbing the other side.
Med Flange Concentric Butterfly Valves are with main Features as below:
ISO 5752, BS 5155, API 609, MSS-SP-68, ASME B16.10, ASME B16.5, DIN 3202.
Materials: Cast Iron and Ductile Iron.
Pressure Ratings: ANSI Class 150 LB, PN10, PN16.
Size Ranges: 2-48 Inch, 50mm-1200mm (Larger sizes upon request).
Ends Connections: F.F, R.F.
Optional Seatings: Resilient NBR, EPDM, VITON.
Actuations: Manual, Pneumatic, Electric, Hydraulic (Counterweight) & Electro-hydraulic.
Comment Form
